3D I-Cut

Introducing I-Cut Industrial Compound from 3D...

3D I-Cut is an industrial grade, fast-cutting one-step compound and polish designed for high-volume production shops where speed and efficiency are a top priority. I-Cut is a great solution for quickly removing sand marks with its ability to provide a long buffing cycle or open time that wipes off easily. VOC & Prop 65 Compliant. Body Shop Safe. Water Based. 

Directions:

Always work on a cool, clean surface outside of the sun. Shake product well before & during use.

Sanding Marks:

• To remove sandpaper marks, apply 4 to 5 dime size drops on a wool or microfiber cutting pad. Buff a section approximately 2' x 2'. After sanding marks are removed, wipe off excess product with a microfiber towel.

Finish & Polish

• To finish, apply 4 to 5 dime size drops onto a face of a foam polishing or finishing pad. Using a low to medium speed setting, buff a section approximately 2' x 2'. When the holograms and swirl marks are removed, wipe off any excess residue using a clean, soft microfiber towel to reveal the perfect finish.